General, Projects

MAPEI TILE SYSTEM JOINS SPEC AT TOWER HAMLETS’ NEW TOWN HALL

An extensive tiling project has been completed at Tower Hamlets’ new Town Hall using a Mapei installation system. The project, which included the reception area, washrooms and entrance, was completed by Stone & Ceramic for Bouygues. Tiles specified included natural stone, brick-slips, porcelain and ceramics.

Located within the former Royal London Hospital building in Whitechapel – which had been vacant since 2013 – the new Town Hall project brings the historic Grade II listed landmark building back into the community. Working closely with Tower Hamlets Conservation Officers, Bouygues preserved the integrity of the building and restored many historic features. Inside, the town hall now provides over 1,500 workspaces, meeting rooms and welfare facilities, whilst the entire ground floor is dedicated to public use. The new design was created by Allford Hall Monaghan Morris.

The tile installation, by Stone & Ceramic, included 1200x600mm terrazzo tiles, Brick Slips, Portland Stone, 1200x600mm porcelain tiles and 150x150mm ceramic tiles. To prepare surfaces, two Mapei products were specified: Mapei’s Nivoplan smoothing mortar and fibre-reinforced Ultraplan Renovation Screed 3240 levelling compound. Tiles were installed using three Mapei cementitious adhesives, which each feature a very low VOC formulation; they included Keraquick S1 quick-setting, deformable adhesive, Keraflex high performance adhesive and Keraflex Maxi S1 – a deformable cementitious adhesive with an extended open time.

Two Mapei grouts were used to install the tiles: Kerapoxy Easy Design, a very low VOC epoxy formulation with improved workability and Zero range Ultracolor Plus grout – Mapei’s anti-efflorescence, quick-setting and drying polymer-modified grout, featuring water-repellent DropEffect® and mould-resistant BioBlock® and with CO2 emissions offset in its entire life cycle. Mapesil AC highly elastic and mould-resistant acetic silicone sealant was also applied to create strong seals throughout the washrooms.

For more information about the project and Mapei specification, please contact info@mapei.co.uk or visit www.mapei.co.uk.

Leave a Reply

Your email address will not be published. Required fields are marked *

« Previous post «
Next post » »